- Menu
- Search
- Cart
Duncan Duncan Matte Spray
Description
Attention Spray cans and aerosols can only be shipped by ground . You must choose USPS First Class or UPS Ground; we cannot ship By Priority Mail, 2nd day air or any expedited shipping method.
no shipping spray cans to Alaska, Hawaii, Puerto Rico and Catalina Island. Or any other countries. Canada is okay by UPS ground.
How to use
- Shake all aerosol products before using.
- Spray to side of object and move spray onto surface of object. Stop spraying only after you have moved spray off to side of object. Never start or stop spraying directly on object.
- Keep can in constant motion while spraying. A slow, even movement is best, giving better coverage and preventing runs and sags caused by spraying one spot heavily when you stop moving can.
- Most sprays perform best when held approximately 8” to 12” from object. However, this may vary with particular product and climate in your area.
- Always check directions on can. Holding can too far away will produce too light a coating. Holding can too close will cause sags or runs.
- Always try to attain wet, thin film on surface being sprayed and always spray directly head-on at object.
- Apply as many coats as necessary for desired effect; 2 light coats are better than one heavy coat. Remember to keep can moving once spray is hitting object. Do not stop spraying until you have moved spray off to side of object.
- Always start off object in upper left-hand corner and go back and forth in even, side-to-side motion ending in lower right-hand corner, letting each stroke come completely off object and overlapping each stroke approximately one-third. When finished turn object 90 degrees and repeat same procedure in opposite direction. This will result in very even, uniform coating.
- When spraying back and forth, hold can at same distance from object rather than swinging can in arc. When spraying round, sculptural or deeply relieved objects, spray in round, circular motion instead from side-to-side.
- Always spray directly (head on) at object, and from correct distance. Start spraying off surface of object and finish off surface of object.
WARNING: This product can expose you to chemicals including Silica, crystalline (airborne particles of respirable size), which are known to the State of California to cause cancer. For more information go towww.P65Warnings.ca.gov.
ABOUT US
Since our founding in 1985, we’ve been on a journey of continuous evolution. Our mission is to create a welcoming place for our customers to shop, offer top-quality products, and deliver exceptional service. We’re also dedicated to fostering a great work environment for our team, ensuring that our business remains a fulfilling and enjoyable way to sustain our livelihoods. Every day, we strive to blend tradition with innovation, shaping the future of our community and our craft.
WHO WE ARE
New Mexico Clay is a REAL store with REAL people, where our legacy spans over 38 years at the same location. We're not just a store—we’re a community of 22 dedicated individuals committed to serving you. Once a top distributor of Duncan ceramics in the USA, we've adapted and grown even after Duncan's closure. Today, NMCLAY is proud to produce millions of pounds of clay annually for potters, hobbyists, and giftware manufacturers alike.
BRANT PALLEY
Brant Palley, a native of Albuquerque, began working for the Kings in 1985. With a Bachelor of Fine Arts from UC Irvine and a Master of Fine Arts from Otis Art Institute and Parsons School of Design, along with five years of intensive retail experience in Atlantic City, NJ, Brant was well-prepared to take the reins. The Kings, recognizing his expertise and passion, entrusted the business to Brant, who acquired it from them in 1987. As a potter at heart, Brant is particularly passionate about the clay side of the business, which remains a central focus of New Mexico Clay to this day.
